More Views

  • Supermicro SuperStorage SSG-6038R-E1CR16N - Front
  • Supermicro SuperStorage SSG-6038R-E1CR16N - Rear

Supermicro SuperStorage SSG-6038R-E1CR16N

Call for price.
SKU:SSG-6038R-E1CR16N

Quick Overview:

Key Features:
• Dual socket R3 (LGA 2011) supports
• Intel® Xeon® processor E5
• UP to 3TB of memory
• 16x 3.5" Hot-swap SAS3/SATA3 drive bays
• 2x 80mm hot-swap rear exhaust PWM fans
• 920W Redundant Power Supplies Platinum Level (94%)

Details

Supermicro SuperStorage SSG-6038R-E1CR16N

Product SKU
SSG-6038R-E1CR16N • SuperServer 6038R-E1CR16N (Black)
Motherboard
  • Super X10DRi-T4+
Processor/Cache
CPU • Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
• Dual Socket R3 (LGA 2011)
Cores/Cache • Up to 22 Cores† / Up to 55MB† Cache
System Bus • QPI up to 9.6 GT/s
  • † BIOS version 2.0 or above is required
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity • 24x 288-pin DDR4 DIMM slots
• Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM
Memory Type

• 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes • RDIMM: 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
• 3DS LRDIMM: 128GB
Memory Voltage • 1.2 V
Error Detection • Corrects single-bit errors
On-Board Devices
Chipset • Intel® C612 chipset
SAS • SAS3 (12Gbps) via Broadcom 3108 AOC; HW RAID 0,1,5,6,10,50,60
SATA • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC
Network
Controllers
• Quad 10GBase-T LAN with IntelX® X540 Ethernet Controller
• Virtual Machine Device Queues reduce I/O overhead
• Realtek RTL8201N PHY (dedicated IPMI)
Graphics • ASPEED AST2400 BMC
Input/Output
LAN • 4 RJ45 10GBase-T LAN ports
• 1 RJ45 Dedicated IPMI LAN port
USB • 3 USB 3.0 ports (2 rear + 1 Type A)
• 2 USB 2.0 ports (2 rear)
VGA • 1 VGA port
Serial Port/Header • 2 Fast UART 16550 serial; 2 COM Ports (1 rear, 1 header)
SATA • 10 SATA3 (6Gbps) ports
DOM • 2 SuperDOM (Disk on Module) ports
TPM






• 1 TPM 1.2 20-pin Header






Chassis
Form Factor • 3U Rackmount
Model CSE-836BE1C-R920B
Dimension and Weight
Width • 17.2" (437mm)
Height • 5.2" (132mm)
Depth • 25.5" (648mm)
Gross Weight • 76 lbs (34.5 kg)
Available Colors • Black
Front Panel
Buttons

• Power On/Off button
• System Reset button

LEDs

• Power status LED
• Hard drive activity LED
• 2 Network activity LEDs
• System Overheat LED
• Power fail LED

Expansion Slots
PCI-Express

• 2 PCI-E 3.0 x16 slots
• 3 PCI-E 3.0 x8 slots
• 1 PCI-E 2.0 x4 (in x8) slot
• Slot 3 & 4 occupied by controller and JBOD Expansion Port

Drive Bays
Hot-swap

• 16x 3.5" Hot-swap SAS3/SATA3 Drive Bays

Optional

• 2x 2.5" optional rear Hot-swap SATA drive bays

Backplane
 

• SAS3/SATA3 single expander per backplane

System Cooling
Fans

• 2x 80mm hot-swap rear exhaust cooling fans
• Redundant cooling

Power Supply w/Power Distributor
  • 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output • 4 Amp @ +5V standby
• 75 Amp @ +12V
Certification • Platinum Certified
System BIOS
BIOS Type

• 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

• Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0/ 2.0/ 3.0/ 4.0
• USB SMBIOS 2.7.1
• UEFI 2.3.1

Operating Environment/Compliance
RoHS

• RoHS Compliant

Environmental Spec.

• Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)