Supermicro Server Board X11SDW-14CNT-TP13F | Intel® Xeon® D-2177NT | Proprietary WIO
Details
|
Product SKUs
| |
|---|---|
| MBD-X11SDW-14CNT-TP13F | • X11SDW-14CNT-TP13F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary WIO |
| Dimensions | • 8" x 9.6" (20.32cm x 24.38cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor D-2177NT |
| Cores/Cache | • 14 cores, 28 threads / 19MB cache |
|
System Memory
| Memory Capacity | • Up to 256GB Registered ECC RDIMM, DDR4-2666MHz; Up to 512GB LRDIMM LRDIMM, DDR4-2666MHz, in 4 DIMM slots |
|---|---|
| Memory Type | • 2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM • (Operating speed up to 2133MHz) |
| DIMM Sizes | • 8GB, 16GB, 32GB, 64GB, 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| SATA | • SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| IPMI | • ASPEED AST2500 |
| Network Controllers | • Quad LAN with Intel® Ethernet Controller I350-AM4 • Dual LAN with 10G SFP+ LAN via SoC • Dual LAN with 10Gbase-T • Quad LAN with 1GbE with Inte® I350-AM4 • Single LAN with 1GbE with Intel® I210 • Total 13 LAN ports • Single LAN with Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2500 BMC • Header Only |
|
Input/Output
| |
|---|---|
| SATA | • 4 SATA3 ports via SoC controller |
| LAN | • 2 10G SFP+ LAN ports • 2 RJ45 10GBase-T ports • 9 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 4 USB 2.0 ports (4 headers, Type A)) • 2 USB 3.1 Gen1 ports (2 Rears Type A) |
| Video Output | • 1 VGA port, • Header Only |
| Serial Port/Header |
• 2 COM Ports (1 rear, 1 header) |
| TPM
|
• 1 TPM Header & Chip both
|
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x32 Left Riser Slot |
| M.2 | • 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2280/22110 |
|
System BIOS
| |
|---|---|
| BIOS Type | • UEFI 256Mb |
| BIOS Features | • Features
ACPI 6.1 • SMBIOS 3.1 • UEFI 2.7 • PCI FW 3.2 |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog |
| System Mangement Software | • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Power Configuration | • +12V DC Power Input |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • Voltage +1.5V, +12V, +3.3V, +5V, +5V standby, 5 (4-pin), 5 -fan status, 6 -fan status, Chassis intrusion header, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature |
| FAN | • 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control, Overheat LED indication, PWM fan speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment |
| LED | • CPU / System Overheat LED, UID/Remote UID |
| Other Features | • 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Intel® QuickAssist Technology , M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
• 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 5% - 95% (non-condensing) |