Supermicro Server Board X11SDW-12C-TP13F | Intel® Xeon® D-2163IT | Proprietary WIO
Details
|
Product SKUs
| |
|---|---|
| MBD-X11SDW-12C-TP13F | • X11SDW-12C-TP13F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary WIO |
| Dimensions | • 8" x 10" (20.32cm x 25.4cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor D-2163IT |
| Cores/CPU | • 12 cores, 24 threads / 17MB cache |
|
System Memory
| Memory Capacity | • Up to 256GB Registered ECC RDIMM, DDR4-2400MHz; Up to 512GB LRDIMM LRDIMM, DDR4-2400MHz, in 4 DIMM slo |
|---|---|
| Memory Type | • 2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM • (Operating speed up to 2133MHz) |
| DIMM Sizes | • 8GB, 16GB, 32GB, 64GB, 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| SATA | • SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
| IPMI | • ASPEED AST2500 • Support for Intelligent Platform Management Interface v.2.0 |
| Network Controllers | • Quad LAN with Intel® Ethernet Controller I350-AM4 • Quad LAN with 1GbE with Inte® I350-AM4 • Dual LAN with 10G SFP+ LAN via SoC • Dual LAN with 10Gbase-T • Single LAN with 1GbE with Intel® I210 • Total 13 LAN ports • Single LAN with Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2500 BMC • Header Only |
|
Input/Output
| |
|---|---|
| SATA | • 4 SATA3 ports via SoC controller |
| LAN | • 9 RJ45 Gigabit Ethernet LAN ports • 2 RJ45 10GBase-T ports • 2 10G SFP+ LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 4 USB 2.0 ports (4 headers, Type A)) • 2 USB 3.1 Gen1 ports (2 Rears Type A) |
| Video Output | • 1 VGA port, • Header Only |
| Serial Port/Header |
• 2 COM Ports (1 rear, 1 header) |
| TPM |
• 1 TPM Header & Chip both |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x32 Left Riser Slot |
| M.2 | • 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2280/22110 |
|
System BIOS
| |
|---|---|
| BIOS Type | • UEFI 256Mb |
| BIOS Features | • ACPI 6.1 • SMBIOS 3.1 • UEFI 2.7 • PCI FW 3.2 |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog |
| System Mangement Software | • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Power Configuration | • +12V DC Power Input |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.5V, +12V, +3.3V, +5V, +5V standby, 6 -fan status, Chassis intrusion header, HT, Memory, Memory Voltages, Supports system management utility, System level control, System temperature |
| FAN | • 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment |
| LED | • CPU / System Overheat LED, UID/Remote UID |
| Other Features | • 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
• 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 5% - 95% (non-condensing) |