Supermicro Server Board X10SDV-8C+-LN2F | Intel® Xeon® D-1541 | Single Socket FCBGA1667
Details
|
Product SKUs
| |
|---|---|
| MBD-X10SDV-8C+-LN2F | • X10SDV-8C+-LN2F |
| Physical Stats
|
|
|---|---|
| Form Factor | • Mini-ITX |
| Dimensions | • 6.7" x 6.7" (17.02cm x 17.02cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® Processor D-1541 |
| Cores/Cache | • 8 cores, 16 threads / 12MB cache |
|
System Memory
| Memory Capacity | • Up to 128GB Registered ECC RDIMM, DDR4-2133MHz • Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots |
|---|---|
| Memory Type | • 2400/2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM |
| DIMM Sizes | • 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • System on Chip |
|---|---|
| SATA | • SoC controller for 6 SATA3 (6 Gbps) ports • RSTe, Intel Raid 0,1,5,10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Network Controllers | • Dual LAN with Intel® Ethernet Controller I350-AM2 • Single LAN with Virtual Machine Device Queues reduce I/O overhead • Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 6 SATA3 (6Gbps) port |
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 4 USB 2.0 ports (4 headers, Type A)) • 2 USB 3.0 ports (2 rear) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 1 COM Port (1 header) |
| TPM |
•
TPM Header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x16 |
| M.2 | • 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash with AMI BIOS |
| BIOS Features | • PCI 3.0 • ACPI 5.0 • USB Keyboard support • Hardware BIOS Virus protection • RTC (Real Time Clock) Wakeup • SMBIOS 2.8 • UEFI 2.4 |
|
Management
| |
|---|---|
| Software | • Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, 4 fans with tachometer monitoring, Chassis intrusion header, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature |
| FAN | • 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED |
| Other Features | • 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -20°C ~ 60°C (-4°F ~ 140°F) |
| Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range | • 5% - 95% (non-condensing) |