JavaScript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.

Supermicro Server Board H11DSi | Dual AMD EPYC™ 7000-series | E-ATX Form Factor

Supermicro Server Board H11DSi | Dual AMD EPYC™ 7000-series | E-ATX Form Factor

Description

Details

Supermicro Server Board H11DSi | Dual AMD EPYC™ 7000-series | E-ATX Form Factor

Product SKUs
MBD-H11DSi	• H11DSi

Physical Stats
Form Factor	• E-ATX
Dimensions	• 12" x 13.05" (30.5cm x 33.1cm)

Processor/Cache
CPU	• Dual AMD EPYC™ 7000-series Processors • Socket SP3
Cores	• Up to 32 Cores
Chipset	• System on Chip

System Memory
Memory Capacity	• 16 DIMM sockets • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs • 8-channel memory bus • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type	• DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes	• 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage	• 1.2V
Error Detection	• Corrects single-bit errors • Detects double-bit errors (using ECC memory)

OnBoard Devices
SATA	• SATA3 (6 Gbps)
IPMI	• Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2500 BMC
Network Controllers	• 2 1GbE LAN via Intel® i350-AM21 • 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics	• ASPEED AST2500 BMC

Input/Output
SATA	• 10 SATA3 (6 Gbps) ports
LAN	• 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port
USB	• 2 USB 3.0 ports (rear) • 4 USB 2.0 ports (2 rear + 2 via header)
VGA	• 1 VGA port
Others	• 1 COM port (rear) • 2 SATA DOM power connector • 1 TPM 2.0 header

Expansion Slots
PCI-E	• 3 PCI-E 3.0 x8 • 2 PCI-E 3.0 x16
M.2	• Interface: 1 SATA/PCI-E 3.0 x2 • Form factor: 2280, 22110 • Key: M-key

System BIOS
BIOS Type	• AMI 128Mb SPI Flash EEPROM
BIOS Features	• Plug and Play (PnP) • DMI 2.3 • PCI 2.2 • ACPI 5.1 • USB Keyboard Support • SMBIOS 3.1.1

Management
Software	• Super Doctor 5 • Watch Dog • NMI • SUM • IPMI 2.0, KVM with dedicated LAN
Power Configuration	• ACPI Power Management • Power-on mode control for AC power loss recovery

PC Health Monitoring
CPU	• Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby • CPU switching voltage regulator • Supports system management utility • VBAT
FAN	• Up to 8-fan status tachometer monitoring • Up to eight 4-pin fan headers • Dual Cooling Zone • Status monitor for speed control • Pulse Width Modulated (PWM) fan connectors
Temperature	• Monitoring for CPU and chassis environment • CPU Thermal Trip Support • Thermal control for 8x Fan connectors • I2C Temperature Sensing Logic
LED	• CPU / System Overheat LED
Other Features	• Chassis Intrusion Detection • Chassis Intrusion Header • UID

Operating Environment
Operating Temperature Range	• 10°C to 35°C (50°F to 95°F)
Non-Operating Temperature Range	• -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity Range	• 8% to 90% (non-condensing)
Non-Operating Relative Humidity Range	• 5% to 95% (non-condensing)