Details
Hot-swap drive trays using Supermicro Super X7DB3 mother board and SC825TQ-R700LPV Chassis.
| Product SKU | |
|---|---|
| SYS-6025B-3RV | • SuperServer 6025B-3RV (Silver) | 
| SYS-6025B-3RB | • SuperServer 6025B-3RB (Black) | 
| Motherboard | |
|---|---|
| Super X7DB3 | |
| Processor/Cache | |
|---|---|
| CPU | • Dual 771-pin LGA Sockets | 
| System Bus | • 1333 / 1066 / 667 MHz system bus | 
| OS Software | • Supports 64-bit Operating Systems • Supports 32-bit Operating Systems | 
| System Memory | |
|---|---|
| Memory Capacity | • Eight 240-pin DIMM sockets • Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory • Dual branch memory bus • Memory must be populated in pairs • Memory Mirroring supported | 
| Memory Type | • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs | 
| DIMM Sizes | • 512 MB, 1GB, 2GB, 4GB | 
| Memory Voltage | • 1.8 V or 1.5 V (AMB) | 
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | 
| On-Board Devices | |
|---|---|
| Chipset | • Intel® 5000P (Blackford) chipset • MCH + PXH + ESB2 | 
| SATA | • Intel ESB2 SATA 3.0Gbps Controller • RAID 0, 1, 5, 10 support | 
| SAS | • Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller • SAS Dual-Channel (internal) • Each SAS channel supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives • Host RAID 0, 1, & 10 support | 
| RAID | • Support for Zero-Channel RAID • Optional: (Card not included) • RAID 0, 1, 5, 10 | 
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 | 
| Network Controllers | • Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller | 
| Graphics | • ATI ES1000 controller with 16 MB of video memory | 
| Super I/O | • Winbond 83627HG chip | 
| Input/Output | |
|---|---|
| SAS | • Eight SAS / SATA (internal) ports • Up to 8 SAS / SATA hard drives supported | 
| Serial ATA | • Six Serial ATA ports • Six SATA hard drives supported | 
| IDE | • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card • Compact Flash (40-pin connector, IDE 1, single channel) slot • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | 
| Floppy | • 1 Floppy controller; 1.44 MB, 2.88 MB | 
| LAN | • 2x RJ45 LAN ports | 
| USB | • 2x USB rear ports • 3x USB internal headers • Total 5 USB 2.0 Compliant / 1.1 Compliant | 
| VGA | • 1 VGA port | 
| Keyboard / Mouse | • PS/2 keyboard and mouse ports | 
| Serial Port / Header | • 1 Fast UART 16550 serial port | 
| Parallel Port | • 1 ECP / EEP parallel port | 
| Chassis | |
|---|---|
| Form Factor | • 2U Rackmount | 
| Model | • SC825TQ-R700LPV | 
| Dimension and Weight | |
|---|---|
| Height | • 3.5" (89mm) | 
| Width | • 17.2" (437mm) | 
| Depth | • 25.5" (648mm) | 
| Weight | • 53 lbs (24.0kg) | 
| Available Color | • Silver,Black | 
| Front Panel  | |
|---|---|
| Buttons | • Power On/Off button • System Reset button | 
| LED | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED | 
| Ports | • 2x USB Ports + DB9 COM Port (optional) | 
| Expansion Slot | |
|---|---|
| PCI-Express | • 2 (x8) PCI-e slots • 1 (x4) PCI-e (using x8) slot | 
| PCI-X | • 2x 64-bit 133MHz PCI-X (3.3V) slots • 1x 64-bit 100MHz PCI-X (3.3V) slot | 
| Drive Bays | |
|---|---|
| Hot-Swaps | • 8 x 3.5" Hot-swap SAS drive trays | 
| Peripheral Drives | |
|---|---|
| DVD-ROM | • Slim 8x DVD, 24x CD, DVD-ROM Drive | 
| Floppy | • Slim 1.44MB Floppy Drive (Optional) | 
| SAS/SATA Backplane | |
|---|---|
| • 1x SAS / SATA backplane | |
| System Cooling | |
|---|---|
| Fans | • 3x 80mm 6300 RPM fans | 
| Shroud | • 1x Air Shroud | 
| Power Supply | |
|---|---|
| 700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | |
| AC Voltage | • 100 - 240V, 60-50Hz, 10 - 4 Amp | 
| +5V standby | • 4 Amp | 
| +12V | • 57 Amp | 
| With Power Distributor | •  +5V: 30 Amp • +3.3V: 24 Amp • -12V: 0.6 Amp | 
| PC Health Monitoring | |
|---|---|
| CPU | • Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V | 
| FAN | • Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans • 8x fans with tachometer status monitoring • Status monitor for speed control • Status monitor for on/off control • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors | 
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x fan connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support | 
| LED | • CPU / System Overheat LED | 
| Other Features | • Chassis intrusion detection • Chassis intrusion header • SDDC | 
| Operating Environment / Compliance | |
|---|---|
| Environmental Spec. | • Operating Temperature: 
     5°C to 35°C (41°F to 95°F) 
 
 
 
 
 | 



