Details
|
Product SKUs
| |
|---|---|
| MBD-X11SSQ | • X11SSQ |
| Physical Stats
|
|
|---|---|
| Form Factor | • Micro-ATX |
| Dimensions | • 9.6" x 9.6" (24.38cm x 24.38cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® 6th Generation Core i3 series, Intel® 6th Generation Core i5 series, Intel® 6th Generation Core i7 series, Intel® 7th Generation Core i3 series, Intel® 7th Generation Core i5 series, Intel® 7th Generation Core i7 series, Intel® Celeron®, Intel® Pentium® |
| Note | • BIOS version 2.0 or above is required to support 7th Generation Intel® Core Processors |
|
System Memory
| Memory Capacity | •Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2400MHz, in 4 DIMM slots |
|---|---|
| Memory Type | • 2400/2133/1866MHz Non-ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| DIMM Sizes | • 4GB, 8GB, 16GB |
| Memory Voltage | • 1.2V |
|
OnBoard Devices
| Chipset | • Intel® Q170 Express |
|---|---|
| IPMI | • Intel® Q170 Express controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 • Intel RST |
| Network Controllers | • Single LAN with Intel® PHY I219LM LAN controller • Single LAN with Intel® Ethernet Controller I210-AT |
| Audio | • ALC 888S HD Audio |
| Graphics | • Intel® HD Graphics • 3 Independent Displays |
|
Input/Output
| |
|---|---|
| SATA | • 6 SATA3 (6Gbps) ports |
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports |
| USB | • 8 USB 2.0 ports (4 rear + 4 headers) • 8 USB 2.0 ports (4 rear + 4 headers) 4 USB 3.0 ports (2 rear + 2 headers) |
| Video Output | • 1 HDMI port, 1 DP (DisplayPort) port, 1 DVI - D port • 3 Independent Displays |
| Serial Port/Header |
• 4 COM Ports (4 headers) |
| TPM |
• TPM Header |
| Others |
• 8 bit GPIO, Force On mode by jumper and AC recovery |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 1 PCI-E 3.0 x16 |
| M.2 | • 1 M.2 PCI-E 3.0 x2, 2242/2260/2280 |
|
System BIOS
| |
|---|---|
| BIOS Type | • AMI UEFI |
| BIOS Features | • Plug and Play (PnP) • DMI 2.3 • USB Keyboard support • UEFI 2.3.1 • ACPI 5.0 • SMBIOS 3.0 • PCI 3.0 |
|
Management
| |
|---|---|
| Software | • AMT, NMI, SuperDoctor® 5, vPro, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • Voltage +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 4 -fan status, Chassis intrusion header, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature, VBAT |
| FAN | • 4x 4-pin fan headers (up to 4 fans), Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors |
| Temperature | • CPU thermal trip support, Adaptive Thermal Monitor, PECI 3.0, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED, Standby alert LED |
| Other Features | • ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Intel Smart Response Technology, M.2 NGFF connector, RoHS, System level control, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range |
• -20°C ~ 60°C (-4°F ~ 140°F) |
| Operating Relative Humidity Range |
• 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range | • 10% ~ 95% (non-condensing) |


