Details
|
Product SKUs
| |
|---|---|
| MBD-X10SLE-DF | • X10SLE-DF |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 4.6" x 18.5" (11.68cm x 46.99cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® 4th Generation Core i3 series, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series |
|
System Memory
| Memory Capacity | • Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots • Up to 32GB ECC VLP-UDIMM DDR3-1600MHz per node |
|---|---|
| Memory Type | • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 2GB, 4GB, 8GB |
| Memory Voltage | • 1.35V, 1.5V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • Intel® C224 Express PCH |
|---|---|
| SATA | • Intel® C224 controller for 2 SATA3 (6 Gbps) ports; RAID 0,1 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Dual LAN with Intel® i350 Gigabit Ethernet Controller • Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) • Shared with 2 Nodes |
| Graphics | • Aspeed AST2400 BMC • via KVM connector |
|
Input/Output
| |
|---|---|
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 2 USB 2.0 via KVM connector |
| Video Output | • 1 VGA port • via KVM connector |
| Serial Port/Header |
• 1 COM Port (1 rear), via KVM connector |
| TPM | • KVM connector for 2 USB 2.0, VGA and COM Ports |
|
Expansion Slots
| |
|---|---|
| PCI-E | • N.A. |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • DMI (SMBIOS) 2.7 • ACPI 5.0 • USB Keyboard support |
|
Management
| |
|---|---|
| Software | • IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® III, Watchdog |
| System Mangement Software | • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +12V, +3.3V, +5V, +5V standby, 3+1 Phase-switching voltage regulator, 3.3V standby, Memory, Memory Voltages, Supports system management utility, System level control, System temperature, VBAT |
| FAN | • Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, System level control, Thermal control tachometer fan connectors |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED, UID/Remote UID |
| Other Features | • ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, UID, WOL |
|
Operating Environment
| |
|---|---|
| Operating Temperature Range |
• 0°C ~ 50°C (32°F ~ 122°F) |
| Non-Operating Temperature Range |
• -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
• 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
• 5% - 95% (non-condensing) |


