Details
|
Product SKUs
| |
|---|---|
| MBD-X10QBL | • X10QBL |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 16.79" x 16.4" (42.65cm x 41.66cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® processor E7-8800 v3, |
| Cores / Cache | • Up to 24 cores / Up to 60 MB cache |
|
System Memory
| Memory Capacity | • Up to 2TB 3DS ECC RDIMM, DDR3 1600/1333/1066 MHz; Up to 2TB 3DS ECC LRDIMM, DDR4-1866MHz, in 32 DIMM slots |
|---|---|
| Memory Type | • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 4GB, 8GB, 16GB, 32GB, 64GB |
| Memory Voltage | • 1.35V, 1.5V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • Intel® C602J |
|---|---|
| SATA | •
SATA2 (3Gbps) with RAID 0, 1, 5, 10 SATA3 (6Gbps) with RAID 0, 1 • JBOD support (IT Mode) |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Controllers | • Dual LAN with Intel® i350 Gigabit Ethernet Controller
For X10QBL only • Single LAN with Virtual Machine Device Queues reduce I/O overhead • Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Single LAN with Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 2 SATA3 (6Gbps) port • 4 SATA2 (3Gbps) ports |
| LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 6 USB 2.0 ports (3 rear + 2 headers + 1 Type A) |
| Video Output | • 1 VGA port |
| Serial Port/Header |
• 2 COM Ports (1 rear, 1 header) |
| TPM | • 1 TPM Header |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 2 PCI-E 3.0 x16 |
|
System BIOS
| |
|---|---|
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
|
Management
| |
|---|---|
| Software | • IPMI2.0, KVM with dedicated LAN, SPM, SUM, SuperDoctor® 5, Watchdog |
| Power Configuration | • ACPI Power Management |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Chipset Voltage, HT, Memory, Monitors for CPU Cores, VBAT |
| FAN | • 8x 4-pin fan headers (up to 8 fans), Fan speed control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control |
| Temperature | • Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI |
| LED | • CPU / System Overheat LED |
| Other Features |
• Chassis intrusion detection, Chassis intrusion header, SDDC |


