Supermicro Server Board X10QBi | Quad Socket R1 (LGA 2011) | Proprietary Form Factor
Details
|
Product SKUs
| |
|---|---|
| MBD-X10QBi | • X10QBi |
| Physical Stats
|
|
|---|---|
| Form Factor | • Proprietary |
| Dimensions | • 19" x 17" (48.26cm x 43.18cm) |
|
Processor/Cache
| |
|---|---|
| CPU | • Intel® Xeon® processor E7-4800 series, |
| Cores / Cache | • Up to 24 cores / Up to 60 MB cache |
|
System Memory
| Memory Capacity | • Up to 12TB 3DS ECC RDIMM, DDR4-1866MHz; Up to 12TB 3DS ECC LRDIMM, DDR4- • LRDIMM, DDR4-1866MHz1866/1600/1333/1066/800MHz ECC DDR4 , 96 DIMM slots, up to 12 TB total memory capacity |
|---|---|
| Memory Type | • 1866/1600/1333/1066/800MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated DIMMs |
| DIMM Sizes | • RDIMM: 4GB, 8GB, 16GB, 32GB • LRDIMM: 32GB, 64GB • 3DS LRDIMM: 128GB |
| Memory Voltage | • 1.2V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
OnBoard Devices
| Chipset | • Intel® C602J |
|---|---|
| SATA | • 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10 • 2 SATA2 (3 Gbps) ports; 4 RAID 0,1,5,10 |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Network Controllers | • Intel® X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead • Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1 Realtek RTL8291F PHY (dedicated IPMI) |
| Graphics | • Aspeed AST2400 BMC |
|
Input/Output
| |
|---|---|
| SATA | • 2 SATA3 (6Gbps) port • 4 SATA2 (3Gbps) ports |
| LAN | • 2 RJ45 10GBase-T ports • 1 RJ45 Dedicated IPMI LAN port |
| USB | • 6 USB 2.0 ports (4 rear2 Type A) |
| Video Output | • 2 VGA (1 rear bezel, 1 front panel) ports |
| Serial Port/Header |
• 2 COM Ports (1 rear, 1 header)
• 2 fast UART 16550 serial |
|
Expansion Slots
| |
|---|---|
| PCI-E | • 4x PCI-E 3.0 x16 (slot 2, 4, 9, 11) |
|
System BIOS
| |
|---|---|
| BIOS Type | • AMI UEFI |
|
Management
| |
|---|---|
| Software | • IPMI2.0, SuperDoctor® III |
|
PC Health Monitoring
| |
|---|---|
| Voltage | • +1.8V, +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, Memory, VBAT |
| FAN | • 7x 4-pin fan headers (up to 7 fans), 4x 9cm + 3x 8cm fans w/ speed control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control |
| Temperature | • Monitoring for CPU and chassis environment |
| LED | • CPU / System Overheat LED |
| Other Features |
• Chassis intrusion detection, Chassis intrusion header, SDDC |