Supermicro 1U Rackmount SuperStorage SSG-5018A-AR12L

Supermicro 1U Rackmount SuperStorage SSG-5018A-AR12L

Call for price.
SKU:SSG-5018A-AR12L

Quick Overview:

Key Features:
• Single socket FCBGA 1283 supports Intel® Atom® processor C2750
• System on Chip
• 12x 3.5" Hot-swap HDD bays
• Up to 64GB Unbuffered ECC/non-ECC DDR3 1600MHz in 4x DIMM slots
• 1x PCI-E 2.0 x4 (in x8, LP, HL)
• Dual GbE LAN ports with SoC
• Integrated IPMI 2.0 and KVM with Dedicated LAN
• I/O ports: IPMI, 2x GbE, VGA
• 400W High-efficiency redundant short depth Power Supplies

Due to the complexity of integration, this product is sold as completely assembled systems only (including but not limited to CPUs, memory, and 12 HDDs). Please contact your Supermicro sales rep for special requirements.

Details

SuperServer SSG-5018A-AR12L

Supermicro SSG-5018A-AR12L 1U Rackmount Barebone with 400W High-efficiency redundant short depth Power Supplies, Intel® Atom® processor C2750 Socket on Chip support
12x 3.5" Hot-swapHDD bays using Supermicro Super A1SA7-2750F Atom Motherboard and CSE-801LTS-R406P 1U Rackmount Chassis.

Product SKU
SSG-5018A-AR12L • SuperServer 5018A-AR12L
Motherboard
        Super A1SA7-2750F
Processor/Cache
CPU

• Intel® Atom™ Processor C2750
• CPU TDP 20W (8-Core)
• FCBGA 1283
• System-on-Chip
System Memory
Memory Capacity • 4x 240-pin DDR3 DIMM slots
• Supports up to 64GB DDR3 ECC or non-ECC UDIMM memory
Memory Type • 1600/1333MHz ECC DDR3 SDRAM, 204-pin gold-plated DIMMs
DIMM Sizes • 16GB, 8GB, 4GB, 2GB
Memory Voltage • 1.5 V, 1.35 V
On-Board Devices
Chipset • Socket on Chip
SAS/SATA • SoC controller for 1 SATA3 (6Gbps) port
• LSI 2116 SW controller for 16 SATA3 ports, SATA3 or SAS2 with IT mode
IPMI • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Nuvoton WPCM450 BMC
Network Connectivity

• Dual LAN w/ SoC, I354 Built in LAN GbE MACs
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201F PHY (dedicated IPMI)
VGA • ASPEED AST2400 BMC
Input/Output
LAN • 2 RJ45 GbE LAN ports
• 1 RJ45 Dedicated IPMI LAN port
USB • 3 USB 2.0 ports (2 rear, 1 Type A)
DOM • 1x SATA DOM (Disk on Module) power connector for OS drive
VGA

• 1 VGA port

 

 

 

 

 

 

 

 

 

 

 
Chassis
Form Factor • 1U Rackmount
Model • CSE-801LTS-R406P
Dimension and Weight
Height • 1.7" (43mm)
Width • 17.2" (437mm)
Depth • 32" (813mm)
Gross Weight • 38 lbs (16.5kg)
Front Panel
Buttons • Power On/Off button
LED • Network activity LEDs
Expansion Slots
PCI-Express

• 1x PCI-E 2.0 x4 (in x8, Low-profile, Half-height) slot
Drive Bays
Internal • 12x 3.5" Hot-swap HDD bays
Backplane
  • SAS/SATA HDD Backplane
System Cooling
Fans • 6x 40x28mm PWM cooling fans
Power Supply
  400W Redundant Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC
AC Input • 100-240V, 50-60Hz, 6-3A
• 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
DC Output • +5V standby: 3A
• +12V: 33A
DC Output With Power Distributor • +5V: 25A
• +3.3V: 25A
• -12V: 0.6A
System Bios
Bios Type • 16MB SPI Flash EEPROM with AMI BIOS
Bios Features • DMI 2.3
• PCI 2.3
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
Operating Environment / Compliance
RoHS • RoHS Compliant
Environmental Spec. • Operating Temperature: 10°C to 35°C (50°F to 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)