Details
SuperServer SYS-1018GR-T
Supermicro 1018GR-T 1U Rackmount barebone with 1400W High-efficiency Power Supply, Intel® C612 Chipset support 6x 2.5" Hot-swap drive bays using Supermicro X10SRG-F Server
motherboard and CSE-118GTS-1K43BP 1U Rackmount Chassis.
motherboard and CSE-118GTS-1K43BP 1U Rackmount Chassis.
Product SKU |
|
|---|---|
| SYS-1018GR-T | • SuperServer 1018GR-T (Black) |
Motherboard |
|
|---|---|
| Super X10SRG-F | |
Processor/Cache |
|
|---|---|
| CPU | • Intel® Xeon® processor E5-2600 v4†/ v3, E5-1600 v4†/ v3 family (up to 145W TDP **) • Single Socket R3 (LGA 2011) |
| Core/Cache | • Up to 22 Cores† / Up to 55MB† Cache |
| Note | • † BIOS version 2.0 or above is required |
| • ** Motherboard supports this maximum TDP. Please verify your system can thermally support | |
System Memory |
|
|---|---|
| Memory Capacity |
• 8x 288-pin DDR4 DIMM slots • Up to 1TB ECC 3DS LRDIMM • Up to 512GB ECC LRDIMM • Up to 512GB ECC RDIMM |
| Memory Type | • 2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
| DIMM Sizes |
• 3DS LRDIMM: 128GB • LRDIMM: 64GB, 32GB • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
On-Board Devices |
|
|---|---|
| Chipset | • Intel® C612 chipset |
| SATA | • SATA3 (6Gbps) via C612 controller • RAID 0, 1, 5, 10 support |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
| Network Connectivity | • Intel® i350 Dual Port Gigabit Ethernet |
| Graphics | • Matrox G200eW |
Input/Output |
|
|---|---|
| SATA | • 6x SATA3 (6Gbps) ports |
| LAN |
• 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB 3.0 ports (rear) |
| Video | • 1x VGA Connector |
| Serial Port/Header | • 2x Fast UART 16550 ports / 1 rear and 1 header |
System Bios |
|
|---|---|
| Bios Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features |
• Plug and Play (PnP) • APM 1.2 • DMI 2.3 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • Hardware BIOS Virus protection • SMBIOS 2.7.1 • UEFI 2.3.1 • RTC (Real Time Clock) Wakeup |
Chassis |
|
|---|---|
| Form Factor | • 1U Rackmount |
| Model | • CSE-118GTS-1K43BP |
Dimension and Weight |
|
|---|---|
| Height | • 1.7" (43mm) |
| Width | • 17.2" (437mm) |
| Depth | • 28.5" (724mm) |
| Gross Weight | • 36 lbs (16.33 kg) |
| Available Color | • Black |
Front Panel |
|
|---|---|
| Buttons |
• Power On/Off button • System Reset button |
| LED | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED / Fan fail LED / UID LED |
Expansion Slots |
|
|---|---|
| PCI-Express |
• 2x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards) |
Drive Bays |
|
|---|---|
| Hot Swap | • 6x 2.5" Hot-swap drive bays |
System Cooling |
|
|---|---|
| Fans | • 8x counter-rotating fans with optimal fan speed control |
Power Supply |
|
|---|---|
| 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | |
| AC Voltage | • 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz • 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz |
| +5V standby | • 6 Amp |
| +12V | • 100 Amp/115 Vac • 117 Amp/230 Vac |
| With Power Distributor | • +5V: 14 Amp |
| Certification | • Platinum Certified |
PC Health Monitoring |
|
|---|---|
| CPU |
• Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. • CPU Core 5-Phase-switching voltage regulator |
| FAN | • Total of eight 4-pin PWM fans • 8x fans with tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low noise fan speed control |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 8x Fan Connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI |
| LED | • Power Fail / Overheat LED • Suspend-state Indicator LED • UID LED |
| Other Features | • SDDC Support |
Operating Environment / Compliance |
|
|---|---|
| RoHS | • RoHS Compliant |
| Environmental Spec. |
• Operating Temperature:
5°C to 35°C (41°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |


