Details
supports Super P4DP8-G2 Server Motherboard and SC742S-500 Rackmountable Tower Chassis.
|
Product SKU
| |
|---|---|
| SYS-7042P-8R | • SuperServer 7042P-8R (Beige) |
| SYS-7042P-8RB | • SuperServer 7042P-8RB (Black) |
|
Motherboard
| |
|---|---|
| Super P4DP8-G2 | |
|
Processor/Cache
| |
|---|---|
| CPU | • Dual mPGA603 ZIF Sockets |
| System Bus | • 400MHz system bus |
|
System Memory
| |
|---|---|
| Memory Capacity | • Eight 184-pin DIMM sockets • Supports up to 16 GB DDR200 memory • Dual channel memory bus • Memory must be populated in pairs |
| Memory Type |
• DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
|
On-Board Devices
| |
|---|---|
| Chipset | • Intel® E7500 chipset |
| SCSI | • Adaptec AIC-7902 Controller |
| RAID | • Support for Zero-Channel RAID w/ ZCR Card (Card NOT included) |
| IPMI | • Support for Intelligent Platform Management Interface v.1.5 (Optional) |
| Network Controllers | • Dual Intel® 82546EB Gigabit Ethernet |
| Graphics | • ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
|
Input/Output
| |
|---|---|
| PCI | • Max 2x 64-bit 133MHz PCI-X (3.3V) slots |
| IDE | • Dual EIDE channels support up to four UDMA IDE devices |
| USB | • Up to 5 USB ports |
| Serial Port | • 2 Fast UART 16550 serial ports |
| Parallel Port | • 1 ECP/EEP parallel port |
| Floppy | • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| Keyboard/Mouse | • PS/2 keyboard and mouse ports |
|
System Bios
| |
|---|---|
| Bios Type | • 4Mb Flash EEPROM with Phoenix® BIOS |
| Bios Features | • Plug and Play (PnP)
|
|
Chassis
| |
|---|---|
| Form Factor | • 4U Rackmountable / Tower • Optional Rackmount Kit (CSE-PT26) |
| Model | • SC742S-500 |
|
Dimension and Weight
| |
|---|---|
| Height | • Tower: 17.8" (452mm) / Rackmount: 7.0" (178mm) |
| Width | • Tower: 7.0" (178mm) / Rackmount: 17.8" (452mm) |
| Depth | • 23.8" (605mm) |
| Gross Weight | • 56 lbs (25.5kg) |
| Available Color | • Beige / Black |
|
Front Panel
| |
|---|---|
| Buttons |
• Power On/Off button |
| LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power Fail LED |
|
Drive Bays
| |
|---|---|
| Hot-Swap | • 7x 3.5"SCA Ultra320/160 Hot-swap Drives |
| Peripheral Bay(s) | • 3x 5.25" Peripheral Drive Bay • 1x 5.25" Bay For Floppy Drive |
|
SCSI Backplane
| |
|---|---|
|
• Single Channel SCSI Backplane w/o SAF-TE |
|
|
System Cooling
| |
|---|---|
| Fans |
• 2x 90mm Hot-swappable Fans |
|
Power Supply
| |
|---|---|
| 500W Triple-redundant AC power supply w/ PFC | |
| AC Voltage | • 100 - 240V, 47-63Hz, 5-10 Amp |
| DC Output | • 12V + 5V + 3.3V ≤ 480W |
| +5V | • 40.0 amp |
| +5V standby | • 3.0 Amp |
| -5V | • 0.5 Amp |
| +12V | • 32.0 Amp |
| -12V | • 1.0 Amp |
| +3.3V | • 35.0 Amp |
|
PC Health Monitoring
| |
|---|---|
| CPU |
• Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby |
| FAN | • Total of seven 3-pin fan headers • 4x fans with tachometer monitoring • Overheat backup fan connector • Status monitor with firmware/software on/off control |
| Temperature | • Monitoring for CPU, chassis, environment • CPU thermal trip support |
| LED | • CPU Overheat LED • System Overheat LED • Suspend-state indicator LED |
| Other Features | • Chassis intrusion detection (through LDCM) |