Details
Hot-swap drive bays using Supermicro Super X8DTU-6TF+ Motherboard and CSE-219A-R920UB 2U Chassis.
Product SKU  | 
 |
|---|---|
| SYS-2026T-6RFT+ | • SuperServer 2026T-6RFT+ (Black) | 
Motherboard  | 
 |
|---|---|
| Super X8DTU-6TF+ | |
Processor/Cache  | 
  |
|---|---|
| CPU | • Dual 1366-pin LGA Sockets  | 
  
| QPI | • up to 6.4 GT/s  | 
  
System Memory  | 
 |
|---|---|
| Memory Capacity | 
 • 18x 240-pin DIMM slots • Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory • Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory • Memory Mirroring supported  | 
 
| Memory Type | • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs | 
| DIMM Sizes | • 1GB, 2GB, 4GB , 8GB** , 16GB** | 
| Memory Voltage | • 1.5 V / 1.35 V | 
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)  | 
 
On-Board Devices  | 
 |
|---|---|
| Chipset |  • Intel® 5520 (Tylersburg) chipset • ICH10R  | 
 
| SAS |  • LSI 6Gbps SAS 2108 w/ Hardware RAID support • RAID 0, 1, 5, 6, 10, 50, 60 support • BBU (battery backup) extension kit (optional)  | 
 
| SATA |  • Intel ICH10R SATA 3.0Gbps Controller • RAID 0, 1, 5, 10 support  | 
 
| IPMI | • Support for Intelligent Platform Management Interface v.2.0  | 
 
| Network Controllers | • Intel® 82599EB 10 Gigabit Ethernet Controller with 2 SFP+ interfaces  | 
 
| Graphics | • Matrox G200eW  | 
 
| Super I/O | • Winbond 83827HF chip | 
Input/Output  | 
 |
|---|---|
| Serial ATA |  • Six Serial ATA ports • Six SATA hard drives supported  | 
 
| LAN | 
     • 2x RJ45 LAN ports • 2x SFP+ LAN port • 1x RJ45 Dedicated IPMI LAN port  | 
 
| USB | • 2x USB rear ports • 1x USB on-board • 2x USB internal headers • Total 5 USB 2.0 Compliant  | 
 
| VGA | • 1 VGA port | 
| Keyboard / Mouse | • PS/2 keyboard and mouse ports  | 
 
| Serial Port / Header | • 1 Fast UART 16550 serial port 
  | 
 
Chassis  | 
 |
|---|---|
| Form Factor | • 2U Rackmount | 
| Model | • CSE-219A-R920UB | 
Dimension and Weight  | 
 |
|---|---|
| Height | • 3.5" (89mm) | 
| Width | • 17.25" (438mm) | 
| Depth | • 27.75" (705mm) | 
| Weight | • 55 lbs (24.9kg) | 
| Available Color | • Black | 
Front Panel   | 
 |
|---|---|
| Buttons | 
 • Power On/Off button • System Reset button  | 
 
| LED |  • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED • Power fail LED  | 
 
| Ports | • 2x USB Ports | 
Expansion Slot  | 
 |
|---|---|
| PCI-Express |   • 2 (x8) PCI-E 2.0 slots (Left Slot)  | 
 
Drive Bays  | 
 |
|---|---|
| Hot-Swaps | • 16x 2.5" SAS / SATA Hot-swap drive trays * (see note below) | 
Peripheral Drives  | 
 |
|---|---|
| DVD-ROM | • Slim 8x DVD, 24x CD, DVD-ROM drive | 
Backplane  | 
 |
|---|---|
| • 2U SAS/SATA Backplane | |
System Cooling  | 
 |
|---|---|
| Fans | • 4x 80mm 6300 RPM fans | 
| Shroud | • 1x Air Shroud | 
Power Supply with Power Distributor  | 
 |
|---|---|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | |
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp | 
| DC Output | •  4 Amp @ +5V standby • 75 Amp @ +12V  | 
   
| Certification | • Platinum Certified | 
PC Health Monitoring  | 
 |
|---|---|
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. • 6-Phase-switching voltage regulator  | 
 
| FAN | • Total of eight fan headers supporting up to 8 fans • Eight 4-pin fan headers • 8x fans with tachometer status monitoring • Support 3-pin fans (w/o speed control) • Low noise fan speed control  | 
 
| Temperature | • Monitoring for CPU and chassis environment • Thermal Control for 8x fan connectors • PECI  | 
 
| Other Features | • Chassis intrusion detection • Chassis intrusion header  | 
 
Operating Environment / Compliance  | 
 |
|---|---|
| RoHS | • RoHS Compliant | 
| Environmental Spec. |   • Operating Temperature: 
     5°C to 35°C (41°F to 95°F)  | 
 


