Details
Supermicro SYS-1027R-WC1NR 1U SuperServer
Supermicro SYS-1027R-WC1NR 1U SuperServer with 10 Hot-swap 2.5" drive bays
(8 SAS3 and 2 NVMe PCIe SSD/SATA3), 700W Redundant Power Supplies
Gold Level Certified .
Product SKU |
|
|---|---|
| SYS-1027R-WC1NR | • SuperServer 1027R-WC1NR (Black) |
Motherboard |
|
|---|---|
| Super X9DRW-CF31 | |
Processor / Cache |
|
|---|---|
| CPU |
• Dual Socket R (LGA 2011) • Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP) |
| Note | † BIOS version 3.0 or above is required |
| Cache | • Up to 30MB |
| System Bus | • QPI up to 8 GT/s |
System Memory |
|
|---|---|
| Memory Capacity | • 16x 240-pin DDR3 DIMM slots • Up to 1TB DDR3 ECC LRDIMM • Up to 512GB DDR3 ECC Registered memory (RDIMM) • Up to 128GB DDR3 ECC and non-ECC UDIMM |
| Memory Type | • 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Size | • 64GB (LRDIMM), 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | • 1.5 V, 1.35 V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
On Board Devices |
|
|---|---|
| Chipset | • Intel® C602J Chipset |
| SATA | • SATA3 (6Gbps) with RAID 0, 1 |
| SAS | • SAS3 (12Gbps) via LSI 3108 • RAID 0, 1, 5, 6, 10, 50, 60 support • 2GB DDR3 Cache |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • Nuvoton WPCM450 BMC |
| Network Controllers | • Intel® i350 Dual Port Gigabit Ethernet Controller • Virtual Machine Device Queues reduce I/O overhead • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | • G200 (Nuvoton WPCM450 BMC) |
Input / Output |
|
|---|---|
| Serial ATA / NVMe PCIe SSD | • 2x SATA3 (6Gbps) / NVMe PCIe SSD ports |
| SAS | • 8x SAS3 (12Gbps) ports |
| LAN | • 2x RJ45 Gigabit Ethernet LAN ports |
| USB | • 6x USB 2.0 ports total (4 rear, 2 front) |
| VGA | • 1x VGA port |
| Serial Port / Header | • 1x Fast UART 16550 header |
Management |
|
|---|---|
| Software | • SuperDoctor® III • Watch Dog • NMI • SUM and SSM • IPMI 2.0 • Intel Node Manager |
| Power Configurations | • ACPI / APM Power Management |
Chassis |
|
|---|---|
| Form Factor | • 1U Rackmount |
| Model | • CSE-116AC2-R700WB |
Dimension and Weight |
|
|---|---|
| Height | • 1.7" (43mm) |
| Width | • 17.2" (437mm) |
| Depth | • 23.5" (597mm) |
| Gross Weight | • 46 lbs (20.9kg) |
| Available Color | • Black |
Front Panel |
|
|---|---|
| Buttons |
• Power On/Off button • UID button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
Expansion Slot |
|
|---|---|
| PCI-Express | • 1 PCI-E 3.0 x16 Full-height, Half-length slot (CPU2 Required) |
Drive Bays |
|
|---|---|
| Hot-swap | • 10 Hot-swap 2.5" drive bays (8 SAS3 and 2 NVMe PCIe SSD/SATA3) |
Backplane |
|
|---|---|
| • SAS/SATA/NVMe PCIe SSD | |
System Cooling |
|
|---|---|
| Fans | • 5x 40x56mm Counter-rotating PWM Fans |
Power Supply |
|
|---|---|
| • 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C | |
| AC Voltage | • 700W: 100 - 140 V, 50-60 Hz, 8.5-6 Amp • 750W: 180 - 240V, 60-50 Hz, 5-3.8 Amp |
| DC Output +5V standby |
• 3 Amp |
| DC Output +12V | • 700W: 58 Amp @ 100-140V • 750W: 62 Amp @ 180-240V |
| With Power Distributor | • +5V: 25 Amp • +3.3V: 12 Amp • -12V: 0.6 Amp |
| Certification | • Gold Certified |
System Bios |
|
|---|---|
| Bios Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • BIOS resuce hot keys • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
Operating Environment / Compliance |
|
|---|---|
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature:
10°C to 35°C (50°F to 95°F)
|