Huawei E9000 Blade Server Chassis
Product Image | |||
Provides 16 slots in a 12U chassis that includes redundant Power Supply Units (PSUs), heat-dissipation modules, management modules, and switch modules. This converged infrastructure platform features an optimized layout to make best use of the available space.
The Huawei E9000 chassis can be installed in a standard 19-inch rack at a depth of at least 1m. The chassis is available with AC or DC power setups to suit data center requirements.
Leverage Huawei’s deep experience in computing, storage, and networking to help reduce system deployment time from a few days to a few hours.
Huawei server with Intel® Xeon® processor. Intel, the Intel logo, Xeon, and Xeon Inside are trademarks or registered trademarks of Intel Corporation in the U.S. and/or other countries.
- Extensive scalability allows E9000 servers to support a variety of services with 48 DIMMs and 15 x 2.5-inch hard disks in a full-width slot along with 2- and 4-socket compute nodes and support for I/O
acceleration using GPUs, PCIe SSDs, and GPUs for General-Purpose computing (GPGPUs) - Switch module choices enable the E9000 to handle a variety of services, with modules including GE, 10 GE, 40 GE, FC, FCoE, and InfiniBand FDR with support for evolution to 100 GE and InfiniBand EDR
- Dynamic power-management functions and Platinum AC PSUs with higher than 95% power conversion efficiency minimize power consumption and heat dissipation
- A passive midplane helps prevent single-point failures, while support for fully redundant function modules enables seamless switchovers
Product Specification | |
Form Factor | 12 U |
Blade | • 16 half-width slots or 8 full-width slots |
Switch Modules | • 4 slots for Huawei CX series switch modules provide a midplane switching capability of 15.6 Tbit/s • CX110 GE switch module: 12 x GE + 4 x 10 GE uplink, 32 x GE downlink • CX111 GE switch module: 12 x GE + 4 x 10 GE uplink, 32 x GE downlink • CX116 GE pass-through module: 32 x GE uplink, 32 x GE downlink • CX210 8G FC switch module: 8 x 8G FC uplink, 16 x 8G FC downlink • CX220 16G FC Switch Module: 8 x 16G FC uplink, 16 x 16G FC downlink • CX310 10 GE switch module: 16 x 10 GE uplink, 32 x 10 GE downlink • CX311 10 GE/FCoE converged switch module: 16 x 10 GE + 8 x 8G FC uplink, 32 x 10 GE downlink • CX317 10 GE pass through module: 32 x 10 GE uplink, 32 x 10 GE downlink • CX611 InfiniBand switch module (QDR 40 Gbit/s, FDR 56 Gbit/s): 18 x QDR/FDR uplink, 16 x QDR/FDR downlink • CX710 40 GE switch module: 8 x 40 GE uplink, 16 x 40 GE downlink • CX912 multi-plane switch module; supports FC ports: 16 x 10 GE + 8 x 8G FC uplink, 32 x 10 GE + 16 x 8G FC downlink • CX915 multi-plane switch module: 4 x 10 GE + 12 x GE + 8 x 8G FC uplink, 32 x GE + 16 x 8G FC downlink |
PSU | AC/DC PSU: maximum six 3,000W/2,000W AC or six 2,500W DC hot-swappable PSUs in N+N or N+M redundancy mode |
Fan Modules | Provides 14 hot-swappable fan modules in N+1 redundancy mode |
Management | • Uses HMMs in 1+1 redundancy mode, supports standard management interfaces, such as SNMP and IPMI, manages computing and switching devices in a unified manner, and provides comprehensive management functions, such as a GUI, remote KVM, virtual media, SOL, remote control, hardware monitoring, intelligent power supply, and historical power consumption • Provides value-added management features, such as multi-frame cascading management, graphic network configuration, and stateless computing |
Power Supply | 110V/220V AC or –48V DC |
Operating Temperature | 5°C to 40°C |
Dimensions | • Height: 530 mm (20.87 in.) • Width: 442 mm (17.40 in.) • Depth: 840 mm (33.07 in.) |