Details
Motherboard and SC733i-645 Mid Tower Chassis.
|
Product SKU
| |
|---|---|
| SYS-7034A-i | • SuperServer 7034A-i (Beige) |
| SYS-7034A-iB | • SuperServer 7034A-iB (Black) |
|
Motherboard
| |
|---|---|
| Super X6DAL-G | |
|
Processor/Cache
| |
|---|---|
| CPU | • Dual 604-pin FC-mPGA4 Sockets |
| System Bus | • 800MHz system bus |
|
System Memory
| |
|---|---|
| Memory Capacity | • Six 184-pin DIMM slots • Supports up to 12 GB DDR 333 • Supports up to 24 GB DDR 266 • Dual channel memory bus • Memory must be populated in pairs |
| Memory Type |
• DDR333/266 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| DIMM Sizes | • 256 MB, 512 MB, 1GB, 2GB, 4GB** |
| Memory Voltage | • 2.5 V only |
|
On-Board Devices
| |
|---|---|
| Chipset | • Intel® E7525 chipset |
| SATA | • 6300ESB support for 2x SATA ports |
| Network Controllers | • 1x Intel® 82541GI Gigabit Ethernet |
| Audio | • AC'97 audio CODEC with high quality 6-channel sound |
|
Expansion Slots
| |
|---|---|
| PCI-Express | • 1 (x16) slot |
| PCI-X | • 2x 64-bit 66MHz PCI-X (3.3V) slot |
| PCI | • 2x 32-bit 33MHz PCI (5V) slot |
|
Input/Output
| |
|---|---|
| Serial ATA | • Two Serial ATA ports |
| IDE | • Dual EIDE channels support up to four UDMA / IDE devices |
| Floppy | • 1 Floppy controller; 1.44 MB support |
| LAN | • 1x RJ45 LAN port |
| USB | • Up to 4 USB 2.0 ports |
| Audio | • 1x Line In / Line Out / Microphone ports |
| Keyboard / Mouse | • PS/2 keyboard and mouse ports |
| Serial Port | • 2 Fast UART 16550 serial ports |
| Parallel Port | • 1 ECP/EEP parallel header (CBL-081) |
|
System Bios
| |
|---|---|
| Bios Type | • 8Mb Flash EEPROM with AMI® BIOS |
| Bios Features | • Plug and Play (PnP)
|
|
Chassis
| |
|---|---|
| Form Factor | • Mid Tower |
| Model | • SC733i-645 |
|
Dimension and Weight
| |
|---|---|
| Height | • 7" (178 mm) |
| Width | • 16.8" (427 mm) |
| Depth | • 20.9" (531 mm) |
| Gross Weight | • 40 lbs (18.1 kg) |
| Available Color | • Beige, Black |
|
Front Panel
| |
|---|---|
| Buttons | • Power On/Off button • System Reset button |
| LEDs | • Power LED • Hard drive activity LED • Network activity LEDs • System Overheat LED |
| Ports | • 2x Front side USB ports (USB 2.0 ready) |
|
Drive Bays
| |
|---|---|
| Drive Carrier | • 4x Internal IDE Drive Carriers |
| Peripheral Bay(s) | • 2x 5.25" peripheral drive bay • 1x 3.5" bay for floppy drive |
|
Peripheral Drives
| |
|---|---|
| Floppy | • TEAC 3.5" 1.44MB Floppy Drive |
|
System Cooling
| |
|---|---|
| Fans |
• 1x 12cm PWM rear exhaust fan |
|
Power Supply
| |
|---|---|
| 645W Low-Noise AC power supply with PFC [ 24-pin, (4-pin, 8-pin) = 12V ] | |
| AC Voltage | • 100 - 240V, 50 - 60Hz, 11 - 5Amp |
| DC Output | • 5V + 3.3V ≤ 160W |
| +5V | • 30.0 Amp |
| +5V standby | • 4.0 Amp |
| +12V | • 46.0 Amp |
| -12V | • 0.6 Amp |
| +3.3V | • 30.0 Amp |
|
PC Health Monitoring
| |
|---|---|
| CPU | • Monitors for CPU Cores (0.865V to 1.6V), +3.3V, +5V, ±12V, 5V Standby • CPU Core 4-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V • Adjustable CPU clock frequency ratio settings (via BIOS) |
| FAN | • Total of six 4-pin fan headers |
| Temperature | • Monitoring for CPU, chassis, environment • CPU thermal trip support |
| LED | • CPU Overheat LED • System Overheat LED • Suspend-state indicator LED |
| Other Features | • Chassis intrusion detection
|