Details
using Supermicro 4x Super X8SIT-F motherboard and CSE-827H-R920B Chassis.
Product SKU |
|
|---|---|
| SYS-5026Ti-BTRF | • SuperServer 5026Ti-BTRF (Black) |
Motherboard |
|
|---|---|
| 4x Super X8SIT-F | |
Processor/Cache |
|
|---|---|
| CPU | • LGA 1156 Socket |
System Memory |
|
|---|---|
| Memory Capacity |
• 6x 240-pin DDR3 DIMM sockets • Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM sockets • Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets • 1333 / 1066 / 800 MHz • Dual Core processors of Ci3 and Pentium: support ECC UDIMM only • Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements |
| Note | • All X3400 series and L3426 CPU support RDIMM and UDIMM • All i3 series, L3406, G6950, and G1101 CPU support UDIMM only |
| Memory Type | • 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | • 1.5 V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
On-Board Devices (per node) |
|
|---|---|
| Chipset | • Intel® 3420 chipset |
| SATA | • 6x SATA (3 Gbps) |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 |
| Network Controllers | • Dual Intel® 82574L Gigabit Ethernet Controllers |
| VGA | • Matrox G200eW 16MB DDR2 |
| Super I/O | • Nuvoton W83627DHG UBE |
Input/Output (per node) |
|
|---|---|
| Serial ATA | • Six Serial ATA ports • 3 SATA hard drives supported |
| LAN | • 2x RJ45 LAN ports • 1x RJ45 Dedicated IPMI LAN port |
| USB | • 2x USB rear ports • 1x USB on-board • 2x USB internal header (4 ports) • Total 7 USB 2.0 Compliant |
| VGA | • 1x VGA port |
| Serial Port / Header | • 1 Fast UART 16550 serial port |
System Bios (per node) |
|
|---|---|
| Bios Type | • 32Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features | • Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | • 2U Rackmount |
| Model | • CSE-827H-R920B |
Dimension and Weight |
|
|---|---|
| Height | • 3.5" (89mm) |
| Width | • 17.2" (437mm) |
| Depth | • 28.5" (724mm) |
| Weight | • 85 lbs (38.6kg) |
| Available Color | • Black |
Front Panel (per node) |
|
|---|---|
| Buttons |
• Power On/Off button • UID button |
| LED | • Power LED (on power button) • Network activity LED • System Overheat/fan fail/power fail/ LED • UID LED (on UID button) |
Expansionn Slot (per node) |
|
|---|---|
| PCI-Express | • 1 (x16) PCI-E 2.0 (Low Profile) |
Drive Bays (per node) |
|
|---|---|
| Hot-swap | • 3x 3.5" SATA Hot-swap drive bays |
Hard Drive Backplane |
|
|---|---|
| • 2U Hard drive Backplane | |
System Cooling |
|
|---|---|
| Fans | • 4x Cooling Fans |
Power Supply with Power Distributor |
|
|---|---|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | |
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | • 4 Amp @ +5V standby • 75 Amp @ +12V |
| With Power Distributor |
• +5V: 30 Amp |
| Cerification | • Platinum Certified |
PC Health Monitoring |
|
|---|---|
| CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | • Total of 5 fan headers supporting up to 5 fans • Five 4-pin fan headers • 5x fans with tachometer status monitoring • Status monitor for speed control • Status monitor for on/off control • Support 3-pin fans (w/o speed control) • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
| Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • FC temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI |
| LED | • CPU / System Overheat LED |
Operating Environment / Compliance |
|
|---|---|
| RoHS | • RoHS Compliant |
| Environmental Spec. | • Operating Temperature: 10°to 35°C (50°to 95°F) |