More Views

  • Supermicro 2U Rackmount Server SYS-6024H-82RB

Supermicro 2U Rackmount Server SYS-6024H-82RB

Call for price.
SKU:SYS-6024H-82RB

Quick Overview:

Key Features:
• Dual Intel® 64-bit Xeon® Support up to 3.60 GHz
• Up to 16GB DDR2-400 SDRAM
• 3 Full-height, Full-length Expansion Slots
  1x 64-bit 133MHz PCI-X
  2x 64-bit 100MHz PCI-X
• Intel® 82546GB Dual-port Gigabit Ethernet Controllers
• 6 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays
• Redundant 500W power supply with I2C for remote management.

Details

SuperServer SYS-6024H-82R / SYS-6024H-82RB 2U Rackmount

Supermicro SYS-6024H-82R / SYS-6024H-82RB 2U Rackmount Barebone with Redundant 500W power supply, Intel® E7520 chipset, 6x 3.5" SCA Hot-swap drive trays using
Supermicro Super X6DH8-G2 mother board and SC823S-R500RC Chassis.

Product SKU
• SuperServer 6024H-82R (Beige)
• SuperServer 6024H-82RB (Black)
Motherboard
        Super X6DHE-G2
Processor/Cache
CPU

• Dual 604-pin FC-mPGA4 Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
• Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
• Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
• Xeon LV (Low Voltage) CPU, up to 2.8 GHz

System Bus

• 800 MHz system bus

OS Software • Supports 64-bit Operating Systems
• Supports 32-bit Operating Systems
System Memory
Memory Capacity • Eight 240-pin DIMM sockets
• Supports up to 16 GB DDR2 400MHz memory
• Dual channel memory bus
• Memory must be populated in pairs
• Single-rank modules are recommended for 6+ DIMM support
Memory Type • DDR2-400 registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage • 1.8V only
Error Detection • Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 Single Device Data Correction (SDDC)
On-Board Devices
Chipset • Intel® E7520 chipset
• MCH + ICH5R + PXH +82546GB
SCSI • Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI
• Host RAID 0, 1, 10, JBOD support
• No Zero Channel RAID Support
IPMI

• Support for Intelligent Platform Management Interface v.2.0

Network Controllers

• Intel® 82546GB Dual Port Gigabit Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Graphics

• ATI Rage XL SVGA PCI video controller with 8 MB of video memory

Super I/O  • National 87427 chip
Input/Output
IDE • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN • 2x RJ45 LAN port
USB • 2x USB rear ports
• 3x USB internal headers
• USB 2.0 Compliant / 1.1 Compliant
VGA • 1x VGA Port
Keyboard / Mouse

• PS/2 keyboard and mouse ports

Serial Port / Header

• 2 Fast UART 16550 serial ports

Parallel Port

• 1 ECP/EEP parallel port

System Bios
Bios Type • 8Mb Flash EEPROM with Phoenix® BIOS
Bios Features

• Plug and Play (PnP)
• SMBIOS 2.3
• DMI 2.1
• ACPI 1.0
• Fan Speed Control


Chassis
Form Factor • 2U Rackmount
Model SC823S-R500RC
Dimension and Weight
Height • 3.5" (89mm)
Width • 16.8" (426mm)
Depth • 25.6" (650mm)
Weight • 57.5 lbs (26.1kg)
Available Color • Beige,Black
Front Panel
Buttons • Power On/Off button
• System Reset button
LED • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
• Power fail LED
Ports • 2x USB Ports (optional)
Drive Bays
Hot-swap • 6x 3.5" SCA Hot-swap drive trays
Peripheral Bay(s)  • 1x 5.25" full-height peripheral bay
Peripheral Drives
Floppy • Panasonic 3.5" 1.44MB Floppy Drive
CD-ROM • TEAC Slim 24x CD-ROM drive
SCA Backplane
  • Single Channel SCSI backplane with SAF-TE
System Cooling
Fans • 4x 80mm 6300 RPM fans Cooling redundancy with fan shroud
Power Supply
  500W (1 + 1) Redundant AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ]
AC Voltage • 100 - 240V, 50/60Hz, 10 Amp
DC Output • 5V + 3.3V ≤ 160W
• 12V Total ≤ 39 Amp
+5V • 30.0 amp
+5V standby • 2.0 Amp
+12V1 • 15.0 amp
+12V2 • 15.0 amp
+12V3 • 18.0 amp
-12V • 1.0 Amp
+3.3V • 21.0 amp
PC Health Monitoring
CPU • Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
• CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
FAN • Total of four 4-pin and four 3-pin fan headers
• 8x fans with status monitoring
• Status monitor with firmware/software on/off control
• Low noise fan speed control
• 4x Pulse Width Modulated (PWM) fan connector
Temperature • Monitoring for CPU, chassis, environment
• CPU thermal trip support
• Thermal Monitor 2 support
LED

• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED

Other Features

• Chassis intrusion detection
• Chassis intrusion header
• SDDC