Details
Supermicro SYS-6015V-M3 / SYS-6015V-M3B 1U Rackmount with 520W High-efficiency Power Supply, Intel® 5000V (Blackford VS) chipset, 4x Hot-swap SAS drive bays, using
Supermicro Super X7DVL-3 Motherboard and SC813MTQ-520C Rackmount Chassis
Product SKU |
|
---|---|
SYS-6015V-M3 | • SuperServer 6015V-M3 (Beige) |
SYS-6015V-M3B | • SuperServer 6015V-M3B (Black) |
Motherboard |
|
---|---|
Super X7DVL-3 |
Processor/Cache |
|
---|---|
CPU | • Dual 771-pin LGA Sockets |
System Bus | • 1333 / 1066 / 667 MHz system bus |
Operating System Software | • Supports 64-bit Operating Systems • Supports 32-bit Operating Systems |
System Memory |
|
---|---|
Memory Capacity |
• Six 240-pin DIMM sockets • Supports up to 24GB 667 / 533MHz DDR2 ECC FB-DIMM memory • Dual branch memory bus • Memory must be populated in pairs • No Memory Mirroring support |
Memory Type | • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 512 MB, 1GB, 2GB, 4GB |
Memory Voltage | • 1.8V only • 1.5V (AMB) |
Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices |
|
---|---|
Chipset | • Intel® 5000V (Blackford VS) chipset |
SAS | • LSI 1068E PCI-E SAS Controller • 8 SAS Ports supporting up to 8 SAS HDD • RAID 0, 1, 10 support • (Optional: AOC-IButton68) RAID 5 support |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • 200-pin IPMI SO-DIMM socket (SIMSO) • (Optional: AOC-SIMLC) • NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot |
Network Controllers | • Two Intel® (ESB2/Gilgal) 82563EB Single-Port Gigabit Ethernet Controllers • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Graphics | • XGI Volari™ Z7 PCI-E Graphics Processor |
Clock Generator | • ICS932S401EGLF |
Super I/O | • Winbond 83627HF chip |
Expansion Slots |
|
---|---|
PCI-X | • Intel® 5000V (Blackford VS) chipset |
Input/Output |
|
---|---|
IDE | • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
Floppy | • 1 Floppy controller; 1.44 MB Support |
LAN | • 2x RJ45 LAN ports |
USB | • 2x USB rear ports |
VGA | • 1x VGA Port |
Keyboard / Mouse | • PS/2 keyboard and mouse ports |
Serial Port / Header | • 1 Fast UART 16550 serial port |
Parallel Port | • 1 Header for ECP / EEP parallel port
|
Chassis |
|
---|---|
Form Factor | • 1U Rackmount |
Model | • SC813MTQ-520C |
Dimension and Weight |
|
---|---|
Height | • 1.7" (43mm) |
Width | • 17.2" (437mm) |
Depth | • 19.8" (503mm) |
Weight | • 38 lbs (17.2kg) |
Available Color | • Beige, Black |
Front Panel |
|
---|---|
Buttons | • Power On/Off button |
LEDs | • Power LED • Hard Drive Activity LED • 2x Network activity LEDs • System Overheat / Fan Fail LED |
Ports | • 2x USB Ports (USB 2.0 Ready) • 1x Serial COM Port |
Drive Bays |
|
---|---|
Hot Swap | • 4x Hot-swap SAS drive bays |
Peripheral Drives |
|
---|---|
DVD-ROM | • Slim 8x DVD, 24x CD, DVD-ROM drive |
Backplane |
|
---|---|
• 1U SAS/SATA Backplane |
System Cooling |
|
---|---|
Fans | • 4x 4cm cooling fans |
Power Supply |
|
---|---|
520W AC to DC power supply w/ PFC | |
AC Voltage | • 100 - 240V, 50 - 60Hz, 7 - 3Amp |
+5V | • 20 Amp |
+5V stand by | • 3 Amp |
+12V | • 39 Amp |
-12V | • 0.5 Amp |
+3.3V | • 16 Amp |
Regulatory (Power Supply) |
|
---|---|
Safety / EMC | • USA - UL Listed, FCC • Canada - CUL Listed • Germany - TUV Certified • Europe / CE Mark • EN 60950/IEC 60950-Compliant |
System Bios |
|
---|---|
Bios Type | • 8Mb Flash EEPROM with Phoenix® BIOS |
Bios Features | • Plug and Play (PnP) • SMBIOS 2.3 • DMI 2.3 • PCI 2.2 • ACPI 1.0 • BIOS rescue hot keys • USB Keyboard support • Hardware BIOS Virus protection |
PC Health Monitoring |
|
---|---|
CPU | • Monitors for CPU Cores, +3.3V, +5V, ±12V |
FAN | • Total of six proprietary 4-pin fan headers supporting up to 6 fans • 6x fans with tachometer status monitoring • Status monitor for speed control • Status monitor for on/off control • 3-pin fan support • Low noise fan speed control • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 6x fan connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support |
LED | • CPU / System Overheat LED • Supsend-State Indicator LED • +5V Standby Alert LED |
Other Features | • Chassis intrusion detection • Chassis intrusion header • SDDC Support |