Details
Product SKUs
| |
---|---|
MBD-X10QBL-4CT | • X10QBL-4CT |
Physical Stats
|
|
---|---|
Form Factor | • Proprietary |
Dimensions | • 16.79"" x 16.4"" (42.65cm x 41.66cm) |
Processor/Cache
| |
---|---|
CPU | • Intel® Xeon® processor E7-4800 v3, |
Cores / Cache | • Up to 24 cores / Up to 60 MB cache |
System Memory
| Memory Capacity | • Up to 4TB 3DS ECC RDIMM, DDR4-1866MHz; Up to 4TB 3DS ECC LRDIMM, DDR4-1866MHz, in 32 DIMM slots2TB DDR4 ECC LRDIMM |
---|---|
Memory Type | • 1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated DIMMs |
DIMM Sizes | • RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB • LRDIMM: 128GB |
Memory Voltage | • 1.2V |
Error Detection | • Corrects single-bit errors |
OnBoard Devices
| Chipset | • Intel® C602J |
---|---|
SATA | • 1 SATA2 (3 Gbps) ports; RAID 0,1,5,10 • 1 SATA3 (6 Gbps) ports; RAID 0,1JBOD support (IT Mode) |
SAS | • SAS3 (12Gbps) via LSI® 3008 controller SW RAID 0, 1, 10 support |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
Network Controllers | • Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Single LAN with Virtual Machine Device Queues reduce I/O overhead • Single LAN with Realtek RTL8211E PHY (dedicated IPMI) • Single LAN with Intel® X540 10GBase-T Ethernet Controller |
Graphics | • Aspeed AST2400 BMC |
Input/Output
| |
---|---|
SATA | • 2 SATA3 (6Gbps) port • 4 SATA2 (3Gbps) ports |
LAN | • 2 RJ45 Gigabit Ethernet LAN ports • 1 RJ45 Dedicated IPMI LAN port |
USB | • 6 USB 2.0 ports (3 rear + 2 headers + 1 Type A) |
Video Output | • 1 VGA port |
Serial Port/Header |
• 2 COM Ports (1 rear, 1 header) |
TPM | • 1 TPM Header |
Expansion Slots
| |
---|---|
PCI-E | • 2 PCI-E 3.0 x16 |
System BIOS
| |
---|---|
BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 / 4.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI 2.3.1 |
Management
| |
---|---|
Software | • IPMI2.0, KVM with dedicated LAN, SPM, SUM, SuperDoctor® 5, Watchdog |
Power Configuration | • ACPI Power Management |
PC Health Monitoring
| |
---|---|
Voltage | • +1.8V, +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, Memory, VBAT |
FAN | • 8x 4-pin fan headers (up to 8 fans), 4x 9cm + 3x 8cm fans w/ speed control, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control |
Temperature | • ure Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, I2C temperature sensing logic, Thermal Monitor 2 (TM2) support, PECI |
LED | • CPU / System Overheat LED |
Other Features |
• Chassis intrusion detection, Chassis intrusion header, SDDC |